The Encore 225 accepts almost any conceivable analog or digital audio source. It is also compatible with many network speakers, such as Sonos. There is a very clear, large, high resolution full colour display so you can see what's going on.

Key Features

  • Easy and intuitive to use
  • Huge connectivity
  • Upgradeable 1TB internal storage for over 2500 CDs (bit perfect ripping from CD drive)
  • Power amplifiers are the same as those in the M6si
  • Compatible with many network speakers, such as Sonos
  • Large, high resolution, full colour display
  • Control with either IR handset or Apps ( both Apple and Android)
  • Dual core 64bit Intel CPU - as future proof as we can make it
  • 32 Bit 384k DAC


Specifications

Amplifier
Power output: 225 Watts per channel into 8 Ohms
THD (+ noise): <0.007 % typical 20Hz - 20 kHz
Signal to Noise Ratio: >107dB 'A' - weighted
Frequency Response: +0, –0.1dB, 10Hz to 20 kHz

Inputs
3 x Line Level RCA 300mV nominal 2V typical up to 7V rms
2 x optical S/PDIF 24 bit inputs up to 192kHz
2 x coax S/PDIF 24 bit inputs up to 192kHz
1 x USB 3.0 type 'A' connector
1 xUSB 3.0 type "B" connector (for future expansion)
3 x USB2.0 type 'A' connector (1 front, 2 rear)
10/100/1000 Base-T Ethernet connector

Outputs
1x line level FIXED 2.0V @ 0dBFS (300mV rms nominal, >6V rms max)
1x line level PREAMP variable outputs (>6V rms max) (Preamp gain, line input to PREAMP outputs is 4.5x (13dB) at maximum volume)
Headphone output suitable for headphones impedance 8 ohms to ∞. (Headphone output features independent volume setting)
Speaker outputs 1 pair 4mm banana plugs per channel
1x optical S/PDIF 24-bit output up to 192kHz
1x coax S/PDIF 24-bit output up to 192kHz
Internal storage 2.5" 1 TB SATA II hard disk (included) or SSD (future upgradeable)

General
Dimensions - WxHxD (mm): 440 x 125 x 400
Weight (packed): 23 kg

Ensore 225